Any person here have experience with those 20-30 dollar airsoft gas masks with the fan? the good, the bad ,the ugly........opinions . To buy or not to buy based on feedback.
Thx
Airsoft Gas mask with fan
Moderators: primer, Shogun Mitsu
- DEFCON
- Posts: 14
- Joined: Mon Apr 21, 2014 11:17 pm
- First Name: JR
- Last Name: STRICKLAND
- Location: NY
Airsoft Gas mask with fan
DEFCON
- EvilAndyXO
- Posts: 14
- Joined: Sun Jun 08, 2014 5:19 pm
- First Name: Andy
- Last Name: Hansen
- Location: Central Coast California
Re: Airsoft Gas mask with fan
No for airsoft, but I use airfed respirators at work all day which is pretty much the same. I wouldn't want anything less than an advantage 1000 because visibility with gas masks/respirators suck and you will get hot no matter if it has a fan or not. Cardio + rubber against your face is not a good equations. If I were looking for the gasmask look with comfort I'd slap a filter on a facemask. Achieve the look without any of the discomfort.
Just my 2 cents,
Andy
Just my 2 cents,
Andy
- Keeper
- Posts: 158
- Joined: Fri Feb 22, 2013 6:13 pm
- First Name: Donald
- Last Name: Swelgin
- Location: Shavertown, Pa
- Contact:
Re: Airsoft Gas mask with fan
if you mean these:

http://www.airsoftatlanta.com/Russian-A ... /66625.htm
Horrible. On a whim, my fiend and I both bought them, one black and he got tan. Lens came out of the black one and the fan barely worked in either one. He later gave me his and I put both of the fans on my black one and it was 'fair' as best. I glued both lens back in and later both popped out of the tan one as well. Cheapo junk.
Suggestion, buy a decent DYE I3 mask and be done with it.

http://www.airsoftatlanta.com/Russian-A ... /66625.htm
Horrible. On a whim, my fiend and I both bought them, one black and he got tan. Lens came out of the black one and the fan barely worked in either one. He later gave me his and I put both of the fans on my black one and it was 'fair' as best. I glued both lens back in and later both popped out of the tan one as well. Cheapo junk.
Suggestion, buy a decent DYE I3 mask and be done with it.
"Might be old...Might be Slow, but I am like a Dog with a Bone. I never give it up."
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm
THE PATRIOTS
The Arsenal: http://patriots.nepa-airsoft.com/Keeper ... s-2016.htm
- DEFCON
- Posts: 14
- Joined: Mon Apr 21, 2014 11:17 pm
- First Name: JR
- Last Name: STRICKLAND
- Location: NY
Re: Airsoft Gas mask with fan
Thanks....Im not going to order after your review and experience.
DEFCON
- Viperstrike
- Site Admin
- Posts: 164
- Joined: Wed Jul 21, 2010 4:54 am
- First Name: Robert
- Last Name: Dziedzic
- Location: New Windsor, NY
Re: Airsoft Gas mask with fan
If you like the gas mask look you can use one of those 3M masks with one of the filters removed.
With a pair of Flak Jakk goggles they do not fog.
With a pair of Flak Jakk goggles they do not fog.

- DEFCON
- Posts: 14
- Joined: Mon Apr 21, 2014 11:17 pm
- First Name: JR
- Last Name: STRICKLAND
- Location: NY
Re: Airsoft Gas mask with fan
Just found a sweet deal on the Toyko Mauri pro goggles.....I , use to have a 3m NBC mask, if I still had I would retrofit it with a fan. The TM mask looks pretty decent and the knock off of it looks ok as well.
DEFCON
- sonic
- Site Admin
- Posts: 735
- Joined: Sat Aug 13, 2011 8:13 pm
- First Name: Ian
- Last Name: Conolly
- Location: Brooklyn
- Contact:
Re: Airsoft Gas mask with fan
I currently use the knockoff goggles with fan (no mask) and have never had a real issue with them. they are a little on the large side, but I wear glasses and they fit comfortably. A little distortion on your peripheral vision. All in all, worth the $30DEFCON wrote:Just found a sweet deal on the Toyko Mauri pro goggles.....I , use to have a 3m NBC mask, if I still had I would retrofit it with a fan. The TM mask looks pretty decent and the knock off of it looks ok as well.